Solution to the Openview No Signal Problem

Are you having the Openview No Signal problem? We are going to help you fix the issue in this article. A lot of people in South Africa have been turning to Openview as an alternative to DSTV. It’s a great option for those fed up with having to pay monthly subscriptions to DSTV. However, like any other Satellite TV service, Openview can be temperamental. You are here because you wish to learn how to fix the OVHD no satellite signal error.

How do I Fix OVHD No Satellite Signal Error?

The following are possible solutions to the Openview no signal issue;

1. Before you proceed to the next steps, you need to make sure that it’s not raining outside and that there are no heavy rain clouds in the direction in which your dish is facing. Most people encounter the OVHD No Signal problem when it rains. Satellite Television transmissions are affected by rain clouds. If that is what is causing your problem, there is no need to try and adjust anything else on your decoder or TV. Simply wait for the rains to pass. Remember, this problem does not affect Openview only. It affects all the other Satellite TV services in the world, including DSTV.
2. The next thing that you will need to do is to restart your Openview decoder. That’s usually enough to fix the OVHD no satellite signal error. Make sure that you do a complete reboot by removing the power cable and waiting for a few minute. Afterwards, reinsert the power cable. Your Openview HD decoder will automatically reboot.
3. You also need to make sure that the connector on the LNB cable is properly screwed onto your decoder. If it’s not properly in place, then you will have the no signal. Sometimes the cable can get pulled off, leaving the connector on the decoder. Remove the connector and reattach it to the LNB cable. Make sure that there is proper contact with the metallic sheet on the cable.
4. If this is your first time getting set up, you will also want to make sure that your satellite dish is pointing in the right direction. If you have been on DSTV all along, then there is no need to adjust anything since Openview and DSTV use the same IS20 Satellite satellite. If you used an accredited installer for the installation, they will have ensured that everything was working fine. If there have been heavy winds, there could be the chance that your dish was moved from the 68.5 degrees east direction in which it needs to point. It’s a rare enough occurrence, but should it happen, you will need to get in touch with an accredited installed.

You may also encounter the OVHD no channels after reset issue.

Summary

That’s how to resolve the Openview OVHD no signal problem. Based on our experience, most people encounter this problem when it’s raining. They are not aware that satellite signals get affected by rain. It’s just something that we all have to live with. It’s a matter of patience. It’s not going to rain forever.

Here is how to reset your Openview decoder.